Tilbakemeldingsmodul med opptattmelder, 8 Utganger, s88(N)

  • Ikke på lager
SKU
1008041
Artikkelnr.
LITRMGB8NG
Produsent
Littfinski DatenTechnik
kr 699,00
Tilgjengelighet: Ikke på lager
c

Åpent kjøp i 30 dager

d

Gratis frakt over 1500 kr

e

Lynrask levering

f

750 m² butikk i Oslo

Detaljer

Tilbakemeldingsenhet med integrert opptattmelder. 8 utganger. Tilkobling via s88 eller s88-N med RJ 45 kabler. De 8 utgangene er delt i to, som gir mulighet til å overvåke sporseksjoner på to forskjellige booster enheter eller overvåking av vendesløyfe med Littfinski vendesløyfe modul KSM SG.

Maks belastning er 3 Ampere (Peak 7 Ampere).

62 moduler av denne typen er støttet for HSI-88(-USB) og de fleste av de store sentralene på markedet. (ESU EcoS, Viessmann Commander, Intellibox, CS1, CS2 med fler).

Modulen trenger ingen ekstern strømforsyning.

Bruksanvisning og tilkoblingseksempler (Link -PDF)

Mer informasjon på Engelsk:

For the connection to command stations and interfaces, which supports the s88-feedback bus: e.g. Märklin Interface (up to 62 units), Märklin Memory (up to 6 units), Central Station 1 and 2 (up to 62 units), Intellibox / TWIN-CENTER (up to 62 units), EasyControl (up to 62 units),  ECoS (up to 62 units), Commander (up to 62 units), HSI-88(-USB) (up to 62 units) and DiCoStation (up to 62 units).
    
It is suitable for the control of 8 track sections with a current load up to 3 Ampere. A short peak current up to 7 Ampere will be acceptable. Isolated rails or track sections to be monitored have to be simply connected to the output clamps of the feedback module to get a digital current supply. The track section can be isolated on one or on both sides.

The 8-fold feedback Module RM-GB-8-N with integrated track occupancy report is separated into two 4-fold occupncy devices. Therefore is it possible to monitor tracks of two different booster circuits. The separation into two 4-fold track occupancy devices simplifies as well the monitoring of reverse-loops.

Including an integrated voltage monitor: If there is no voltage at the tracks (e.g. after short circuit) the occupied identification will be "frozen" during the interruption.

For the feedback module is no additional power supply required. This reduces the wiring effort.

The Feedback Module RM-GB-8-N is for s88-standard connections equipped with 6-poles pin bars and for bus connections according to with screened RJ-45 sockets. Additional information about the standard which will be supported by other manufacturers as well can be found here: http://www.s88-N.eu. The RM-GB-8-N shall be operated with no other supply voltage than +5V. This supply voltage will be automatically available from your command station or from your HSI-88(-USB) via the s88-feedback bus.

The Feedback Module RM-GB-8-N can be combined as required with the feedback module RM-88-N / RM-88-N-O and RM-DEC-88 / RM-DEC-88-O / RM-GB-8 with the s88-feedback module from Märklin and other suppliers.

The Feedback Module RM-GB-8-N from the Digital-Professional-Series can be operated without any problem on your digital controlled layout because it is 100% compatible to the s88-feedback bus. The finished module comes with a 24 month warranty.

Each Feedback Module RM-GB-8-N will be supplied with a detailed operating-/ assembly instruction.

Mer informasjon

Mer informasjon
Produsent Littfinski DatenTechnik
Artikkelnr. LITRMGB8NG