Svingskivedekoder

SKU
1006548
Artikkelnr.
LITTTDECG
Produsent
Littfinski DatenTechnik
kr 1 595,00
Tilgjengelighet: På lager
Kun 1 igjen
-
+
c

Åpent kjøp i 30 dager

d

Gratis frakt over 2000 kr

e

Lynrask levering

f

750 m² butikk i Oslo

Detaljer

Dreieskive dekoder som fungerer både på DCC og Märklin Motorola format.

I tillegg til å være en dreieskive dekoder kan man ved tilkobling av Fleischmann dreieskive unngå å bruke vendesløyvemodul med en enkel permanent strømsmodul (bryter). Se bilde 2 og link til bruksanvisning under.

Fungerer for følgende dreieskiver:

 

Gauge H0

Gauge N

Gauge TT

 

max. 48 track conn.

max. 48 track conn.

max. 24 track con.

Fleischmann

6052, 6152, 6154, 6651 (each with and without "C"), 6652 (with 3-rail conductor)

9152 or 9152C

6680 or 6680C

Roco    

35900

Märklin

7286

 

 

BRUKSANVISNING (Link - PDF)

BRUKSANVISNING for DSU (Fleischmann dreieskive)

 

Passer på alt av DCC, blant annet følgende: Lenz Digital Plus, Tillig-Digital, Arnold Digital, Digitrax, Roco Digital, LGB Digital, Intellibox, TWIN-CENTER, PIKO digital, EasyControl, ECoS 1 (50 000) and 2 (50 200), DiCoStation, KeyCom-DC og Zimo.

Mer informasjon på engelsk:

The command-set of the TT-DEC is compatible to the Märklin Turntable-Decoder 7686. This is a component of the Märklin Digital-Retrofit Kit 7687 for the Turntable 7286. Therefore is an immediate start of the TT-DEC on any  command station or model railway software possible which is supporting the Märklin Turntable-Decoder 7686 respectively the Digital-Retrofit Kit 7687.

The digital format (Märklin-Motorola or DCC) and the location of  the  pit track connections are easily programmable via any command station which is able to switch turnouts or via a model railway software which supports the Märklin turntable 7686. Any pit track connection of the turntable can be programmed as track 1 (reference track).

Turntables with 48 or 24 track connections can be directly digital controlled by the TT-DEC.

The TT-DEC permits the step by step rotation to the right- or left side, the direct connection with pre-selected tracks and turning the movement direction of the turntable by 180 degree.

The rotation speed of the turntable can be individually adjusted via a potentiometer. The motor of the turntable receives a stabilised direct voltage for a steady turning movement of the bridge track.

The Turntable-Decoder TT-DEC is as well able of a digital  operation of Märklin- und Fleischmann-turntables with a refit of a Bell-type armature motor supplied by sb modellbau.

The plug of the 6-poles ribbon cable of the Märklin-Turntable 7286 can be directly plugged onto the pin plug bar of the TT-DEC.

If the Turntable-Decoder TT-DEC will be extended by a PermanentPowerSwitch Unit DSU is always a correct polarity connection of the bridge track on the 2-conductor-Fleischmann turntables possible. Therefore is no reversing loop module for the bridge track required.

If the turntable will be in the line-up track position this can be reported to the model railway software via the feedback output of the Turntable-Decoder TT-DEC.

Mer informasjon

Mer informasjon
Produsent Littfinski DatenTechnik
Artikkelnr. LITTTDECG