Vi bruker informasjonskapsler for å gjøre opplevelsen bedre. I samsvar med det nye e-direktivet trenger vi å be om tillatelse til å sette informasjonskapsler. Lær mer.
Dreieskive dekoder som fungerer både på DCC og Märklin Motorola format.
I tillegg til å være en dreieskive dekoder kan man ved tilkobling av Fleischmann dreieskive unngå å bruke vendesløyvemodul med en enkel permanent strømsmodul (bryter). Se bilde 2 og link til bruksanvisning under.
Fungerer for følgende dreieskiver:
Gauge H0 | Gauge N | Gauge TT | |
max. 48 track conn. | max. 48 track conn. | max. 24 track con. | |
Fleischmann | 6052, 6152, 6154, 6651 (each with and without "C"), 6652 (with 3-rail conductor) | 9152 or 9152C | 6680 or 6680C |
Roco | 35900 | ||
Märklin | 7286 |
|
BRUKSANVISNING for DSU (Fleischmann dreieskive)
Passer på alt av DCC, blant annet følgende: Lenz Digital Plus, Tillig-Digital, Arnold Digital, Digitrax, Roco Digital, LGB Digital, Intellibox, TWIN-CENTER, PIKO digital, EasyControl, ECoS 1 (50 000) and 2 (50 200), DiCoStation, KeyCom-DC og Zimo.
Mer informasjon på engelsk:
The command-set of the TT-DEC is compatible to the Märklin Turntable-Decoder 7686. This is a component of the Märklin Digital-Retrofit Kit 7687 for the Turntable 7286. Therefore is an immediate start of the TT-DEC on any command station or model railway software possible which is supporting the Märklin Turntable-Decoder 7686 respectively the Digital-Retrofit Kit 7687.
The digital format (Märklin-Motorola or DCC) and the location of the pit track connections are easily programmable via any command station which is able to switch turnouts or via a model railway software which supports the Märklin turntable 7686. Any pit track connection of the turntable can be programmed as track 1 (reference track).
Turntables with 48 or 24 track connections can be directly digital controlled by the TT-DEC.
The TT-DEC permits the step by step rotation to the right- or left side, the direct connection with pre-selected tracks and turning the movement direction of the turntable by 180 degree.
The rotation speed of the turntable can be individually adjusted via a potentiometer. The motor of the turntable receives a stabilised direct voltage for a steady turning movement of the bridge track.
The Turntable-Decoder TT-DEC is as well able of a digital operation of Märklin- und Fleischmann-turntables with a refit of a Bell-type armature motor supplied by sb modellbau.
The plug of the 6-poles ribbon cable of the Märklin-Turntable 7286 can be directly plugged onto the pin plug bar of the TT-DEC.
If the Turntable-Decoder TT-DEC will be extended by a PermanentPowerSwitch Unit DSU is always a correct polarity connection of the bridge track on the 2-conductor-Fleischmann turntables possible. Therefore is no reversing loop module for the bridge track required.
If the turntable will be in the line-up track position this can be reported to the model railway software via the feedback output of the Turntable-Decoder TT-DEC.
Artikkelnr. | LITTTDECG |
---|---|
Produsent | Littfinski DatenTechnik |