Åpningstider i påsken: Mandag 25/03 og Tirsdag 26/03: 10-18 | Onsdag 27/03: 10-14 | Påskeaften: Stengt

Ultra-Matt Lucky Varnish / Matt Base, Klarlakk (60 ml)

SKU
1017441
Artikkelnr.
MIG2050
Produsent
Ammo by Mig Jimenez
kr 79,00
Tilgjengelighet: På lager
-
+
c

30 dager bytterett

d

Frakt fra 89 kr, Gratis frakt over 3000 kr

e

Lynrask levering

f

750 m² butikk i Oslo

Detaljer

Ultramatt klarlakk på flaske.

Lucky varnish er Ammo's siste serie med 4 forskjellige typer klarlakk med forbedrede egenskaper som skal gi desidert best resultat. Klarlakken gulner ikke eller endrer farge over tid. Kan også brukes som en matt base for akrylmaling.

Flaskeinnhold: 60 ml

Kan brukes både med pensel og airbrush rett ut av flasken, uten behov for tynning. For absolutt best resultat er det viktig at man legger på klarlakken i tynne lag. Ved airbrushing er det anbefalt et trykk på 1,2 bar (17 psi) og en avstand på rundt 15 cm fra lakksprøyte til modell. La hvert lag tørke 5 minutter før man legger på neste lag. Unngå oppsamling av lakk på modellen. Klarlakken tørker og herder helt på 12 timer.

Mer informasjon på Engelsk:

Flat medium/varnish for all kinds of acrylic paints. Guarantees 100% flat finishes. This varnish can be used in two different ways:
- used straight from the jar as a regular varnish after painting to achieve a dead flat finish.
- it can also be used as a flat medium by adding it to acrylic paints.

Varnish application has long been one of the biggest challenges for modelers. Many have ruined a few models due to the use of poor quality or inappropriate varnishes for the job at hand, and the thing is that the varnishing process is an extremely important step of the build. For the first time, AMMO releases a complete varnish range for winning results on each and every model.
These acrylic varnishes will allow you to get the best results with both brush and airbrush in a very simple manner. It must be used in thin layers, and can be applied directly from the jar without thinning for a perfect finish. When used through the airbrush, we recommend spraying 6 inches (15 cm) away from the surface. It is non-toxic and odorless, and dries completely in 24 hours.
This new varnish range was carefully developed over a lengthy period to ensure the modeler a perfect result every time. Don´t take your chances, use LUCKY VARNISH, a winning product that will rule out any mishap that may occur when using ordinary varnishes. Available in all the usual finishes used in scale modeling, from high gloss to dead flat.

Easy to use and simple to clean. Incredible transparent finishes for all of your models, and accurate for all subjects. Will not yellow or alter colors.
Perfect for both brush and airbrush.
1- Using an airbrush, apply in light and short passes using 1.2 bar (17psi) air pressure, avoiding build up.
2- Let dry at least 5 minutes between coats. Do NOT flood the surface.
3- Let it dry completely for 12 hours.
No thinning needed. Clean with A.MIG-2000 or water

Mer informasjon

Mer informasjon
Glansgrad -
Malingstype Klarlakk
Malingsegenskap Base
Artikkelnr. MIG2050
Produsent Ammo by Mig Jimenez