Finish-Cure 20min Epoxy 4.5 oz, To-komponent Epoxylim

SKU
1018307
Artikkelnr.
BSI209
Produsent
BSI
kr 279,00
Tilgjengelighet: På lager
-
+
c

Åpent kjøp i 30 dager

d

Frakt fra 69 kr, Gratis frakt over 3000 kr

e

Lynrask levering

f

750 m² butikk i Oslo

Detaljer

Fersk epoxylim av høy kvalitet, rett fra produsent! Tørker etter 20, og herder etter 8 timer. Spesielt godt egnet sammen med glassfiber og treverk Mengde: 4.5 oz.

Mer info på engelsk:

FINISH-CURE™ 20 min. epoxy is an excellent, low odor substitute for polyester resins. It can be used for applying fiberglass cloth to wood or by itself to give wood a surface ready for primer and paint. FINISH-CURE™ can be sanded the easiest of all our epoxies and is excellent for the sheeting of foam core wings. Allow 8 hours for full curing. For best results, FINISH-CURE™ should be heated to a temperature above 85 degrees F or applying light weight fiberglass, lay cloth on balsa first, then brush on FINISH-CURE™. When fully saturated, go over the surface with a heat gun, and then squeegee off excess epoxy with a playing card from an old deck. Heat and remove excess several times for a light weight finish. If room temperature is below 70 degrees F use a heat gun on the surface several times for the next 2 hours. When dry, lightly sand, then fill surface with a low weight spakeling compound, scrapping off excess with a playing card. Sand to a smooth finish ready for primer. For heavy weight fiberglass, apply the epoxy before and after laying down the cloth. FINISH-CURE™ is best mixed in a disposable cup.

Mer informasjon

Mer informasjon
Artikkelnr. BSI209
Produsent BSI